Glazed tile equipment

Glazed tile equipment is divided into three parts, roller forming part, pressing part and cutter part. The forming part of the roller table of the glazed tile press is driven by the motor, and the chain drives each roller to rotate. The pressing part of glazed tile equipment is that the hydraulic cylinder drives the mold to move up and down, which can press the colored steel into many sections, like glazed tiles

the cutting tool of glazed tile equipment is driven by the hydraulic cylinder to move the tool up and down, which can cut off the colored steel tile. The production process of the glazed tile pressing machine is as follows: the colored steel plate enters the roller forming part, after forming, it reaches the pressing part, and is pressed into sections with equal distance, and the cutter is responsible for the fixed length cutting. The executive part of glazed tile equipment control includes frequency converter drive motor, hydraulic station motor, two hydraulic solenoid valves for pressing, and two hydraulic solenoid valves for cutting knife

the detection part of glazed tile equipment includes: pulse encoder for detecting the length of colored steel tile, profiled up and down travel switch, knife up and down travel switch, profiled up and down operation button, knife up and down travel button, emergency stop switch, hydraulic start and stop switch, etc. The PLC of glazed tile equipment adopts kdn-k306-24ar of KDN-K3 series. The glazed tile press has 14 inputs /10 relay outputs, which just meets the input and output requirements. Equipped with KDN text screen, it can complete parameter setting, alarm display, help information, production data display, etc

glazed tile equipment should use high number pulse input function. Kdn-k306-24ar has excellent high number input performance and good anti-interference ability when selecting AB phase. And use the constant value interrupt function to determine the accuracy. There are many parameters to be set for the tile press, which can be set with the text screen. There are two kinds of glazed tile equipment parameter setting: equipment parameter setting and user parameter setting. Equipment parameters include: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. The user parameters of glazed tile press include: number of sheets, length, first section, last section, pitch, number of sections, etc. The control system of glazed tile molding machine can also complete the function of veneer cutting