840-900 flat three-layer tile press

840-900 flat three-layer tile press can produce roof panels with different appearances according to production needs. The formed plates rolled by this machine have flat appearance, uniform ripple, good utilization rate, good production automation and good yield. 840-900 flat three-layer tile pressing machine is suitable for civil buildings of large and medium-sized enterprises, such as workshops, locomotive hangars, aircraft hangars, sports venues, exhibition halls, cinemas, etc

840-900 flat three-layer tile pressing machine placement points:

(1) in order to facilitate the maintenance and repair of operation, please be more than 50cm away from the wall

(2) then carefully adjust: the machine stand must be leveled, In order to maintain the degree of delicacy

(3) Secondly, for the installation foundation, the following matters need to be important: a the strength must be able to follow the weight of the machine B the base surface must be flat

(4) the installation of color steel tile equipment (refer to the instructions)

(5) a place with good power supply

840-900 flat plate three-layer tile pressing machine maintenance:

1. Operate in strict accordance with the operating procedures

2. It is strictly forbidden for non designated personnel to operate the equipment, and people are usually allowed to leave the machine and stop

3. The hydraulic oil in the oil pump should be filled regularly, and the electrical part should be checked regularly for normal and stable operation

technical parameters of 840-900 flat three-layer tile press:

installation size: 6500mm × 1200mm × 1500mm

number of forming passes: 11 passes

roller material: 45 # steel

roller plating thickness: 0.05mm

cutter material: Cr12

forming speed: 9-10m/min

electric control system: industrial computer PLC control, components application Delta, Delixi, Chint and other components combined and assembled

frequency converter: accurate counting, anti belt knife function (optional)

host power: 3kw, equipped with No. 4 planetary cycloid reducer

hydraulic station power: 3kw

plate thickness: 0.3-0.8mm

plate spreading width: 1000mm

frequency converter (optional)