Tube flattening machine

The ordinary galvanized pipe commonly used by the round pipe flattening machine is pressed into an elliptical pipe. If high-quality hot-dip galvanized flat pipe is used, there is generally no ready-made finished product in the market, and it is not easy to buy in a small amount. If hot-dip galvanized pipe is used, there is only a circular pipe, which is generally 8 meters long and requires 3 thicknesses. Hot dip galvanized pipe is used. With the change of market conditions, the processing of hot-dip galvanized pipe requires the use of round pipe flattening machine, and the round pipe becomes elliptical pipe forming machine, This device is convenient and practical

technical parameters of round tube flattening machine:

1. Overall dimension of equipment installation: 4500mm& times; 1500mm& times; 1100mm

2. Total weight of equipment: About 2000kg

3. Rolling thickness: 2-3mm

5. Main motor power: 11 motor

6. Working speed: 40 m / min

8. Mold material: bearing steel quenching, hardness hr55& deg;- 60& deg;

9. Roller material: 45 × steel diameter: Ф 80mm

10, vertical plate thickness: 20mm

11, the equipment adopts gear transmission, double PM heavy reducer

12, preloading from the upper and lower 14 groups of molds